Skip to content


Pipe checks at Japan’s nuclear control rooms conducted without removing insulation via the Japan Times

The vast majority of Japan’s 42 viable commercial nuclear reactors have not had detailed checkups performed on the air conditioning and ventilation systems of their central control rooms, it has been learned.

According to Japan Atomic Power Co. and nine utilities that manage nuclear power plants, the checkups — conducted at only two of the plants so far — are carried out without removing the insulation on the pipes.

Last month, Chugoku Electric Power Co. found extensive corrosion and holes, including one measuring 30 cm by 100 cm, in the ventilation pipes of the No. 2 reactor at the Shimane nuclear plant in Matsue, Shimane Prefecture. It was the first time the utility had removed the covering on the pipes since the reactor booted up in 1989.

Concluding the pipes were not functioning properly, Chugoku Electric reported the degradation to the Nuclear Regulation Authority.

[…]

Following the discovery of the pipe degradation at the Shimane No. 2 reactor, the NRA plans to check conditions at all of the nation’s nuclear plants, sources said.

Hokuriku Electric Power Co. detected rust in the ventilation pipes of the No. 1 reactor at its Shika nuclear plant in Ishikawa Prefecture in 2003. After removing the covers and conducting further inspections, the company replaced the equipment in 2008.

The NRA suspects that the pipe corrosion at the Shimane No. 2 reactor may violate nuclear regulatory standards, an official said.

Read more at Pipe checks at Japan’s nuclear control rooms conducted without removing insulation

Posted in *日本語.

Tagged with , .


0 Responses

Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.



Some HTML is OK

or, reply to this post via trackback.